Nominali srovė IN
1 / 2 / 3 / 4 A DC (adjustable per output channel)
4 A (per channel)
Pastaba
EMC – Emission for residential, business and commercial properties and small operations
EMC – Immunity for industrial areas
Environmental influences – Moisture and heat, constant
Environmental influences – Shocks
Environmental influences – Vibrations (sinusoidal)
Equipping power installations with electronic equipment
LABS release – in accordance with test specification VW PV 3.10.7:2005-0
When using CAPAROC E1... modules, for continuous shock in accordance with IEC 60068-2-27 the 6 ms / 15g degree of severity applies
Uždarosios grandinės srovė I0
typ. 20 mA (no load at 24 V)
Vardinė srovė I N
1 / 2 / 3 / 4 A DC (adjustable per output channel)
4 A (per channel)
Nominali srovė (iš anksto nustatyta)
Nominali viršįtampio įtampa
Įjungimo uždelsimas
50 ms (each channel preset by default)
can be adapted with CAPAROC PM IOL and CAPAROC PM PN power modules
Reikalingas atsarginis saugiklis
Only required if Imax of the power supply > the short-circuit switching capacity. Integrated failsafe element.
Trumpojo jungimo perjungimo galia
Uždarosios grandinės srovė I 0
typ. 20 mA (no load at 24 V)
Galios išsklaidymas
< 2.2 W (in nominal operation at 24 V and 4 A)
typ. 0.48 W (no load at 24 V)
Laukimo laikas po kanalo išjungimo
5 s (at overload / short circuit)
Temperatūrinis galios sumažėjimas
12 A (Total current at 65 °C)
16 A (Total current at 55°C)
MTBF (IEC 61709, SN 29500)
12874678.91 h (at 25 °C with 21 % load)
4942154.06 h (at 40°C with 34.25% load)
620311.92 h (at 55°C with 100% load)
Apsauginis elementas
5 A DC (per output channel)
Kontaktų perjungimo tipas
without electrical isolation
Išjungimo laikas
≤ 10 ms (For short circuit > 3.0 x IN)
0.1 s (with overload 2.0…3.0 x IN)
1 s (with overload 1.5…2.0 x IN)
4 s (with overload 1.1…1.5 x IN)
Išjungimas dėl per mažos įtampos
≤ 8.5 V DC (active)
≥ 9.2 V DC (inactive)
Apsauga nuo viršįtampio
≤ 30.5 V DC (inactive)
≥ 32.5 V DC (active)
Maks. talpinė apkrova
≤ 20000 µF (Depending on the current setting and the short-circuit current available)
Izoliacijos nuėmimo ilgis
Lankstaus laidininko skerspjūvis
Laido skerspjūvio plotas (fiksuotas)
Laido skerspjūvis, lankstus, su antgaliu, su plastiko mova
Laido skerspjūvis, lankstus, su antgaliu, be plastikinės movos
Kanalo šviesos diodė išjungta
off (Channel switched off)
Kanalo LED geltona
flashing (Programming mode active)
lit (Channel switched on, channel load > 80% )
two flashes (Check the installation, no communication to power module)
Kanalo LED žalia
lit (Channel switched on)
Kanalo raudona šviesos diodė
flashing (Channel switched off, ready to be switched back on, overload or short-circuit release)
lit (Channel switched off, over- or undervoltage active)
ON temporarily (Channel switched off, 5 s cool-down phase, overload or short-circuit release)
two flashes (Channel switched off, system total current limit exceeded)
Kanalo šviesos diodas raudonas-geltonas
flashing (Channel switched on, overload mode, capacity approximately 110 ... 150%, shutdown after 5 s)
Kanalo LED raudona-žalia
flashing (Channel switched off, programming mode active, current adjustment after overload or short-circuit release)