Montavimo pastaba
NOTE: Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties.
The wires can be connected both with ferrules and without ferrules
Gaminio tipas
Circular connector (cable-side)
Vardinė srovė IN
4 A (2 A when using 0.14 mm² conductors)
Medžiaga
PA 6 (Actuation lever)
TPE-U (Clamping cage, weight: 1.1 g)
Rankenos korpuso medžiaga
Zinc die-cast, nickel-plated
Kontaktinio paviršiaus medžiaga
Kontaktų nešiklio medžiaga
Sraigtinio sujungimo medžiaga
Zinc die-cast, nickel-plated
Standartai/reglamentai
PA 6
PA 6: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
PA 6.6
Prijungimo būdas
Push-lock spring connection
Prijungimo skerspjūvis
0.14 mm² ... 0.5 mm² (with ferrule)
0.14 mm² ... 0.75 mm² (without ferrule)
Prijungimo skerspjūvio plotis (AWG)
26 ... 18 (without ferrule)
26 ... 20 (with ferrule)
Atskiros laidų izoliacijos nuėmimo ilgis
Prisukimo sukimo momentas
0.4 Nm (M12 knurl)
0.8 Nm (Connector with coupling sleeve)
3 Nm (Pressure nut with coupling sleeve)
Kontaktas | Spalva (signalo žymėjimas) | Kontaktas (pasirenkamas)
1 = YE (TD+)
2 = WH (RD+)
3 = OG (TD-)
4 = BU (RD-)
Nominali viršįtampio įtampa
Nominalioji srovė I N
4 A (2 A when using 0.14 mm² conductors)
Įdėjimo/ištraukimo ciklai
≥ 100 (Quantity: 500 with Phoenix Contact mating connector)
Pagrindinio kabelio išėjimas
Signalo tipas/kategorija
PROFINET CAT5 (based on IEC 11801), 100 Mbps
Aplinkos temperatūra (darbinė) (vyriškasis jungtis / moteriškasis jungtis)
-40 °C ... 85 °C (Plug / socket)
Standartinis pavadinimas
M12 connector
Shock, vibration
Standartai/specifikacijos
EN 50155:2001
IEC 61076-2-101