Nominali srovė IN
1 / 2 / 3 / 4 A DC (adjustable per output channel)
max. 16 A (IN+)
max. 40 A (per terminal position when bridging additional devices via IN+)
Pastaba
Always connect the negative pole to terminal IN- to ensure the internal power supply. Return currents from the loads must not be fed back to the power supply via IN- of the circuit breaker.
EMC – Emission for residential, business and commercial properties and small operations
EMC – Immunity for industrial areas
Environmental influences – Moisture and heat, constant
Environmental influences – Shocks
Environmental influences – Vibrations (sinusoidal)
Equipping power installations with electronic equipment
Repeated hard short circuits can reduce the melting integral of the integrated backup fuse.
Uždarosios grandinės srovė I0
Tipas
DIN rail module, one-piece
Darbinė įtampa
0 V DC ... 30 V DC
18 V DC ... 30 V DC
Vardinė srovė I N
1 / 2 / 3 / 4 A DC (adjustable per output channel)
max. 16 A (IN+)
max. 40 A (per terminal position when bridging additional devices via IN+)
Nominali srovė (iš anksto nustatyta)
Nominali viršįtampio įtampa
Reikalingas atsarginis saugiklis
Only required if Imax of the power supply > the short-circuit switching capacity. Integrated failsafe element.
Trumpojo jungimo perjungimo galia
Dielektrinis stipris
max. 35 V DC (Load circuit)
Uždarosios grandinės srovė I 0
Galios išsklaidymas
< 4 W (Nominal operation)
typ. 0.6 W (No-load operation)
Modulio inicijavimo laikas
Laukimo laikas po kanalo išjungimo
5 s (at overload / short circuit)
MTBF (IEC 61709, SN 29500)
11764705 h (at 25 °C with 21 % load)
5319148 h (at 40°C with 34.25% load)
846023 h (at 60°C with 100% load)
Apsauginis elementas
4 A DC (per output channel)
Kontaktų perjungimo tipas
without electrical isolation
Išjungimo laikas
≤ 10 ms (for short circuit > 2.0 x IN)
1 s (1.2 ... 2.0 x IN)
Išjungimas dėl per mažos įtampos
≤ 17.8 V DC (active)
≥ 18.8 V DC (inactive)
Apsauga nuo viršįtampio
≤ 29.5 V DC (inactive)
≥ 30.5 V DC (active)
Maks. talpinė apkrova
30000 µF (Depending on the current setting and the short-circuit current available)
Įjungimo uždelsimas
0.1 s (per output channel)
Prijungimo pavadinimas
Remote indication circuit
Izoliacijos nuėmimo ilgis
Lankstaus laidininko skerspjūvis
Laido skerspjūvio plotas (fiksuotas)
0.2 mm² ... 10 mm²
0.2 mm² ... 2.5 mm²
Laido skerspjūvis, lankstus, su antgaliu, su plastiko mova
0.25 mm² ... 1.5 mm²
0.25 mm² ... 4 mm²
Laido skerspjūvis, lankstus, su antgaliu, be plastikinės movos
0.25 mm² ... 2.5 mm²
0.25 mm² ... 6 mm²
Kanalo šviesos diodė išjungta
off (Channel switched off)
Kanalo LED geltona
flashing (Programming mode active)
lit (Channel switched on, channel load > 80% )
Kanalo LED žalia
lit (Channel switched on)
Kanalo raudona šviesos diodė
flashing (Channel switched off, ready to be switched back on, overload or short-circuit release)
lit (Channel switched off, over- or undervoltage active)
ON temporarily (Channel switched off, 5 s cool-down phase, overload or short-circuit release)
two flashes (Channel switched off, device total current limit 40 A exceeded)