Vardinė valdymo grandinės maitinimo įtampa US
Pritaikymas
Emergency stop
Light grid
Safe shutdown
Safety door
Vardinė valdymo maitinimo srovė IS
typ. 55 mA (Outputs inactive)
Energijos suvartojimas esant US
typ. 1.32 W (Outputs inactive)
Paleidimo laikas
max. 10 s (Boot time)
min. 5 s (Boot time)
Maksimali galios išsklaida nominaliomis sąlygomis
7.48 W (with max. permissible load)
Nominalus veikimo režimas
Nominali impulsinė įtampa / izoliacija
See data sheet, section “Insulation coordination”.
Vardinė valdymo grandinės maitinimo įtampa U S
Nominali valdymo maitinimo srovė I S
typ. 55 mA (Outputs inactive)
Energijos suvartojimas esant U S
typ. 1.32 W (Outputs inactive)
Paleidimo srovė
9.16 A (Δt = 0.5 ms at Us)
max. 524 mA (Δt = 6 µs at Us)
max. 600 mA (Δt = 25 ms at Us)
max. 907 mA (Δt = 10 µs at Us)
Filtravimo laikas
< 250 ms (Test pulse duration)
> 1 s (Test pulse rate)
250 ms (constant)
max. 250 ms (Test pulse rate ≥ 10x configured filter time for high test pulse)
max. 250 ms ±2 ms (adjustable)
max. 3 ms (Test pulse rate ≥ 10x configured filter time for low test pulse)
min. 3 ms ±2 ms (adjustable)
Test pulse rate ≥ 2x set filter time, min. Test pulse rate = 10 ms
typ. 5 ms (in the event of voltage dips at Us)
Apsauginė grandinė
Serial protection against polarity reversal
Surge voltage detection; yes, at 33 V DC
Įėjimo aprašymas
configurable (as signal output or reset input)
Safety-related digital inputs
Įėjimų skaičius
4
8 (4 x 2-channel, 8 x 1-channel)
Įėjimo įtampos diapazonas „0“ signalui
0 V DC ... 5 V DC (for safe Off)
Įėjimo įtampos diapazonas „1“ signalui
Įėjimo srovės diapazonas „0“ signalui
Kabelio ilgis
max. 100 m (per input)
max. 100 m (per output)
Maks. leistina bendra laidininko varža
1.2 kΩ (Input and reset circuit at US)
max. 1.2 kΩ (Input and reset circuit at US)
Srovės suvartojimas
max. 4.6 mA (at a control voltage of 28.8 V DC)
max. 7 mA (at a control voltage of 28.8 V DC)
typ. 3.7 mA (typ. with US)
typ. 5.7 mA (typ. with US)
Išėjimo aprašymas
IEC 61131-2 type 0.25 (observe limiting continuous current)
non-safety-related, configurable (as signal output or reset input)
PNP, digital, IEC 61131-2 type 0.1
PNP, OSSD, digital
Safety-related digital outputs
Apsauga nuo trumpojo jungimo
no
Yes (self-limitation at 1.1 A)
Nuotėkio srovė
< 500 µA (Low state)
max. 4.5 mA (in the Low state)
Maks. indukcinė apkrova
max. 2.4 mH
max. 2.4 mH (See "Protective circuit")
Ribojamas nuolatinis srovės stipris
1.6 A (Total current of all safe digital outputs)
100 mA (per channel)
400 mA (per channel)
400 mA (Total current of all digital signal outputs)
400 mA (Total current of all outputs)
Nominalus išėjimo įtampos diapazonas
18.6 V DC ... 28.2 V DC (US - 0.7 V)
Išjungimo metu išėjimo įtampa
Bandymo impulsai
< 150 µs (Test pulse width, high test pulse)
< 235 µs (Test pulse width of low test pulses)
≤ 200 µs (Test pulse duration)
≥ 1.5 s (Test pulse rate, high test pulse)
≥ 650 ms (Test pulse rate for low test pulse)
No brightness test pulses / high test pulses permitted.
Test pulse rate = 8 x tCycle [ms]
Išėjimo įtampos diapazonas
18.2 V DC ... 27.8 V DC (US - 1 V)
Prijungimo būdas
Push-in connection
USB 2.0 Hi-Speed
Laido skerspjūvio plotas (fiksuotas)