General
The max. load current must not be exceeded by the total current of all connected conductors.
Current and voltage are determined by the plug used.
Maximum power dissipation for nominal condition
Number of connections per level
Connection method
Push-in / plug connection
Internal cylindrical gage
Connection in acc. with standard
Conductor cross-section rigid
0.14 mm² ... 1.5 mm²
0.25 mm² ... 1.5 mm²
Cross section AWG
26 ... 16 (converted acc. to IEC)
Conductor cross-section flexible
Conductor cross-section, flexible [AWG]
26 ... 16 (converted acc. to IEC)
Conductor cross-section flexible ultrasound-compressed
Conductor cross-section, flexible [AWG] ultrasound-compressed
22 ... 16 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)
0.14 mm² ... 1.5 mm²
0.34 mm² ... 1.5 mm²
Flexible conductor cross-section (ferrule with plastic sleeve)
0.14 mm² ... 1 mm² (Using the AI-S 1-8 TQ ferrule, Item No. 1200293, is recommended)
0.34 mm² ... 1 mm²
Nominal current
17.5 A (observe derating)
Maximum load current
17.5 A (with 1.5 mm² conductor cross-section)
Flammability rating according to UL 94
Insulating material group
Ambient temperature (operation)
-60 °C ... 100 °C (max. operating temperature range including self-heating, see derating curve)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
Ambient temperature (actuation)
Permissible humidity (operation)
Permissible humidity (storage/transport)