Order information:
Fuse-link not supplied as standard
General
The current is determined by the fuse used, the voltage by the selected LED.
If the fuse is faulty, the downstream circuit will not be disconnected.
Maximum power dissipation for nominal condition
LED voltage range
110 V AC/DC ... 250 V AC/DC (LED red)
Maximum power dissipation
max. 1.6 W (With interconnected arrangement of several fuse terminal blocks in the event of overload)
max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload)
max. 2.5 W (With interconnected arrangement of several fuse terminal blocks in the event of a short-circuit)
max. 4 W (with single arrangement of the fuse terminal block in the event of a short-circuit)
Number of connections per level
Internal cylindrical gage
Connection in acc. with standard
Conductor cross-section rigid
0.5 mm² ... 10 mm²
1 mm² ... 10 mm²
Cross section AWG
20 ... 8 (converted acc. to IEC)
Conductor cross-section flexible
Conductor cross-section, flexible [AWG]
20 ... 8 (converted acc. to IEC)
Conductor cross-section flexible ultrasound-compressed
Conductor cross-section, flexible [AWG] ultrasound-compressed
22 ... 8 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)
0.5 mm² ... 6 mm²
1 mm² ... 6 mm²
Flexible conductor cross-section (ferrule with plastic sleeve)
0.5 mm² ... 6 mm²
1 mm² ... 6 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
0.5 mm² ... 2.5 mm² When using TWIN ferrules, we recommend a minimum ferrule length of 13 mm.
Maximum load current
10 A (the current is determined by the fuse used)
Flammability rating according to UL 94
Insulating material group
Ambient temperature (operation)
-60 °C ... 110 °C (Operating temperature range incl. self-heating; for max. short-term operating temperature, see RTI Elec.)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
Ambient temperature (actuation)
Permissible humidity (operation)