Typical input current at UN
Date of last data management
Maximum power dissipation for nominal condition
Test voltage (Winding/contact)
Test voltage (Contact/contact)
2.5 kV AC (50 Hz, 1 min.)
Test voltage (open contact)
Input voltage range
179.4 V AC ... 333.5 V AC
Typical input current at UN
Typical response time
3 ms ... 12 ms (depending on phase relation)
Typical release time range
2 ms ... 8 ms (depending on phase relation)
Contact material
AgNi
AgNi, hard gold-plated
Maximum switching voltage
250 V AC/DC
30 V AC
36 V DC
Minimum switching voltage
12 V (At 1 mA)
12 V (at 10 mA)
Limiting continuous current
Min. switching current
1 mA (at 12 V)
10 mA (at 12 V)
Switching capacity
1 A (at 24 V, DC13)
1.5 A (at 120 V, AC15)
1.5 A (at 24 V, AC15)
1.5 A (at 240 V, AC15)
Note
the following values are applicable if a gold layer is destroyed
Interrupting rating (ohmic load) max.
Ambient temperature (operation)
Ambient temperature (storage/transport)
Identification
EN 60068-2-60
ISA-S71.04. G3 Harsh Group
Standards/regulations
EN 50178
EN 61810-1
VDE 0435-201