Typ. starting time with Us
50 ms (with Us when controlled via A1)
Rated control circuit supply voltage US
Application
High demand
Low demand
Safe switch off
Rated control supply current IS
typ. 55 mA (typ. with US)
Mechanical service life
107 cycles
10x 106 cycles
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Typ. starting time with Us
50 ms (with Us when controlled via A1)
Typical release time
50 ms (with Us when controlled via A1)
Maximum power dissipation for nominal condition
Rated surge voltage/insulation
Rated control circuit supply voltage US
Rated control supply current IS
typ. 55 mA (typ. with US)
Inrush current
max. 100 mA
max. 100 mA (typ. with US)
max. 5 A
Filter time
≥ 100 ms (Test pulse rate, high test pulse)
≥ 50 ms (Test pulse rate; low test pulse at A1/A2)
max. 2 ms (Test pulse width; high test pulse at A1/A2)
max. 5 ms (in the event of voltage dips at Us)
max. 5 ms (Test pulse width; low test pulse at A1/A2)
Test pulse rate = 15 x Test pulse width
Test pulse rate = 80 x Test pulse width
Protective circuit
Suppressor diode, 33 V (A1 - A2)
Surge protection
Output description
1 N/C signal contact
2 x N/O, undelayed
Contact switching type
1 confirmation current path
2 enabling current paths
Switching voltage
max. 250 V AC/DC
min. 15 V AC/DC
Switching capacity
5 A (230 V (AC15))
5 A (24 V (DC13))
Limiting continuous current
Output fuse
10 A gL/gG (High demand)
150 mA (fast-blow)
4 A gL/gG (Low demand)
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section, flexible, with ferrule, without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section AWG
Operating voltage display