Typ. starting time with Us
50 ms (with Us when controlled via A1)
Rated control circuit supply voltage US
Application
High demand
Low demand
Safe switch off
Rated control supply current IS
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Typ. starting time with Us
50 ms (with Us when controlled via A1)
Typical release time
50 ms (with Us when controlled via A1)
Maximum power dissipation for nominal condition
Rated surge voltage/insulation
Rated control circuit supply voltage US
Rated control supply current IS
Inrush current
max. 100 mA
max. 5 A
min. 5 mA
Filter time
≥ 100 ms (Test pulse width; high test pulse at A1/A2)
≥ 50 ms (Test pulse rate; low test pulse at A1/A2)
max. 2 ms (Test pulse width; high test pulse at A1/A2)
max. 5 ms (at A1 in the event of voltage dips at Us)
max. 5 ms (Test pulse width; low test pulse at A1/A2)
Test pulse rate = 15 x Test pulse width
Test pulse rate = 80 x Test pulse width
Protective circuit
Surge protection; Suppressor diode, 33 V (A1 - A2)
Output description
1 N/C signal contact
1 NO, undelayed
Contact switching type
1 confirmation current path
1 enabling current path
Switching voltage
max. 250 V AC/DC
min. 15 V AC/DC
Switching capacity
5 A (230 V (AC15))
5 A (24 V (DC13))
Limiting continuous current
100 mA
5 A (N/O contact, pay attention to the derating)
Interrupting rating (ohmic load) max.
Maximum interrupting rating (inductive load)
Output fuse
150 mA Fast-blow
5 A T fuse
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section AWG
Operating voltage display