Typ. starting time with Us
typ. 15 ms (with Us when controlled via A1)
Rated control circuit supply voltage US
Application
High demand
Low demand
Safe switch off
Rated control supply current IS
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Typ. starting time with Us
typ. 15 ms (with Us when controlled via A1)
Typical release time
typ. 15 ms (with Us when controlled via A1)
Maximum power dissipation for nominal condition
6.11 W (at UB = 26.4 V DC, US = 24 V, IS = 45 mA, n = 1, IL² = 48 A², Rcontact = 0.1 )
Rated surge voltage/insulation
4 kV / Basic isolation, (safe isolation, reinforced insulation and 6 kV between input circuit and enabling current paths.)
Rated control circuit supply voltage US
Rated control supply current IS
Filter time
1 ms (at A1-A2; test pulse width)
1 s (at A1-A2; test pulse rate)
Protective circuit
Suppressor diode
Surge protection
Contact switching type
3 enabling current paths
3 signaling current paths
Switching voltage
max. 250 V AC/DC
min. 5 V AC/DC
Switching capacity
5 A (24 V (DC13))
5 A (250 V (AC15))
5 A (AC15, 250 V)
5 A (DC13, 24 V)
Limiting continuous current
Interrupting rating (ohmic load) max.
Maximum interrupting rating (inductive load)
33 W (N/O contact, 220 V DC, τ = 40 ms)
35 W (N/O contact, 110 V DC, τ = 40 ms)
36 W (N/O contact, 60 V DC, τ = 40 ms)
40 W (N/O contact, 48 V DC, τ = 40 ms)
48 W (N/O contact, 24 V DC, τ = 40 ms)
Output fuse
10 A gL/gG NEOZED
4 A gL/gG NEOZED (Low demand)
6 A gL/gG NEOZED
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section, flexible, with ferrule, without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section AWG
Operating voltage display