Rated control circuit supply voltage US
Rated control supply current IS
Mechanical service life
10x 106 cycles
approx. 107 cycles
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Typical response time
typ. 150 ms (For Us autostart)
typ. 20 ms (For Us manual, monitored start)
Typical release time
typ. 20 ms (At Us on demand via sensor circuit)
Recovery time
1 s (following demand of the safety function)
Rated surge voltage/insulation
4 kV / basic isolation (safe isolation, reinforced insulation and 6 kV between input circuit/N/C contacts and enabling current paths).
Rated control circuit supply voltage US
Rated control supply current IS
Protective circuit
Serial protection against polarity reversal
Suppressor diode
Output description
2 N/C contacts parallel, non-safety-related, floating
2 N/O contacts in series, safety-related, floating
2 NC in series, non-floating, safety-related
Contact switching type
1 confirmation current path
1 signaling current path
4 enabling current paths
Switching voltage
max. 250 V AC/DC
max. 26.4 V
min. 15 V
min. 15 V AC/DC
Inrush current
max. 3 A
max. 6 A
min. 25 mA
min. 25 mA AC/DC
Switching capacity (360/h cycles)
Switching capacity (3600/h cycles)
Limiting continuous current
Output fuse
10 A gL/gG NEOZED (High demand)
4 A gL/gG (Low demand)
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section, flexible, with ferrule, without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section AWG
Operating voltage display