Inrush current integral (I2t)
Nominal input voltage range
Setting range of the output voltage (USet)
30 V DC ... 56 V DC (> 48 V DC, constant capacity restricted)
Nominal output current (IN)
Selective Fuse Breaking (ISFB)
Voltage type of supply voltage
Inrush current integral (I2t)
Reverse polarity protection
Nominal power consumption
Protective circuit
Transient surge protection; Varistor
Input fuse
15 A (internal (device protection))
Setting range of the output voltage (USet)
30 V DC ... 56 V DC (> 48 V DC, constant capacity restricted)
Nominal output current (IN)
Selective Fuse Breaking (ISFB)
Magnetic circuit breaker tripping
Derating
60 °C ... 70 °C (2.5 %/K)
Feedback voltage resistance
Protection against overvoltage at the output (OVP)
Active current limitation
Control deviation
< 0.1 % (change in input voltage ±10 %)
< 1 % (change in load, static 10 % ... 90 %)
< 2 % (change in load, dynamic 10 % ... 90 %)
Peak switching voltages nominal load
Maximum no-load power dissipation
Power loss nominal load max.
Rise time
< 2 ms (UOUT (10 % ... 90 %))
Connection in parallel
yes, for redundancy and increased capacity
Output description
IOUT < IN: High signal
UIN > 38.4 V: high signal
UOUT > 0.9 x UN: High signal
Maximum inrush current
< 20 mA (short-circuit-proof)
≤ 20 mA (short-circuit-proof)
Connection method
Pluggable screw connection
Conductor cross-section, rigid min.
Conductor cross-section, rigid max.
Conductor cross-section flexible min.
Conductor cross-section flexible max.
Conductor cross-section AWG min.
Conductor cross-section AWG max.