Nominal input voltage UIN
Nominal input current at UIN
CCCex note
Use in potentially explosive areas is not permitted in China.
Connection method
Inline data jumper
Spring-cage connection
Required configuration data
Input voltage range "0" signal
Input voltage range "1" signal
Nominal input voltage UIN
Nominal input current at UIN
Typical input current per channel
Delay at signal change from 0 to 1
Delay at signal change from 1 to 0
Protective circuit
Short-circuit and overload protection
Scope of supply
including Inline connectors and marking fields
Operating mode
Process data operation with 2 words
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Maximum power dissipation for nominal condition
Supply voltage
24 V DC (via voltage jumper)
7.5 V DC (via voltage jumper)
Current draw
max. 30 mA (from HW 01)
max. 50 mA
max. 90 mA (HW 00)
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O)
Test voltage: 7.5 V supply (bus logic)/functional ground