Nominal input voltage UIN
Nominal input current at UIN
Test voltage: Ethernet interface 1 / logic (UBK, UL, UANA)
Test voltage: Ethernet interface 1 / I/O (UM, US)
Test voltage: Ethernet interface 2 / logic (UBK, UL, UANA)
CCCex note
Use in potentially explosive areas is not permitted in China.
Test voltage: Ethernet interface 2 / I/O (UM, US)
Test voltage: Communications power (UBK, UL, UANA) / I/O (UM, US)
Supported protocols
BootP
DHCP
FTP
HTTP
Modbus/TCP (UDP)
SNMP
TFTP
Test voltage: Communications power (UBK, UL, UANA) / functional ground
Test voltage: I/O (UM, US) / functional ground
Connection method
Inline connector
Inline data jumper
RJ45 jack
Spring-cage connection
Note on the connection method
Auto negotiation and autocrossing
Transmission speed
10/100 Mbps
500 kbps / 2 Mbps (automatic detection, no combined system)
Transmission physics
Ethernet in RJ45 twisted pair
Number of supported devices
Number of local bus devices that can be connected
max. 61 (The on-board I/Os are two devices)
Number of devices with parameter channel
Input voltage range "0" signal
Input voltage range "1" signal
Nominal input voltage UIN
Nominal input current at UIN
Typical input current per channel
Delay at signal change from 0 to 1
Delay at signal change from 1 to 0
Protective circuit
Short-circuit and overload protection; Freewheeling circuit in the output driver
Output voltage
24 V DC -1 V (At nominal current)
Max. current carrying capacity per output
Maximum output current per module