PSR-MC82-5NO-1NC-1DO-24DC-SC Extension module

2702382

PSR-MC82-5NO-1NC-1DO-24DC-SC Extension module

Manufactured by

Brand PHOENIX CONTACT

Contact extension up to SIL 3, Cat. 4, PL e in conjunction with suitable evaluation device, 5 enabling current paths, U_S = 24 V DC, plug-in screw terminal block

4055626145471

No suppliers found

Product recommended retail price (RRP) is

0⁰⁰€

201⁶⁰€ 0 € pcs.

All prices without tax

All prices with tax

inquiry

only

available

100+

inquiry

pcs.

Properties

Description

Dimensions

Files

Codes

Note on application

Only for industrial use

Typ. starting time with Us

< 50 ms (with U_s when controlled via A1)

Product type

Safety relays

Rated control circuit supply voltage US

19.2 V DC ... 30 V DC

24 V DC -20 % / +25 %

Description of the input

safety-related

Product family

PSRcompact

PSRmini

Application

Extension module

Number of inputs

Control

1 and 2 channel

Input voltage range "1" signal

19.2 V DC ... 30 V DC

Current consumption

typ. 80 mA

Relay type

Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3

Ohmic load

min. 240 Ω

Overvoltage category

II, III

III

Degree of pollution

Discharging circuit

Tightening torque

0.5 Nm ... 0.6 Nm

Typical response time

< 50 ms (Monitored/manual and auto-start)

Shock (operation)

15g (In the event of stress caused by shock, contact reactions are possible for up to 6 ms)

Typ. starting time with U_s

< 50 ms (when controlled via A1/A2)

Typical release time

< 25 ms (when controlled via A1)

< 25 ms (when controlled via A1/A2)

Recovery time

< 100 ms

Maximum power dissipation for nominal condition

15.2 W (at U_S = 30 V, I_L² = 64 A²)

15.2 W (U_B = 30 V , I_L² = 64 A²; P_Total max = 2.4 W + 12.8 W)

Nominal operating mode

100% operating factor

Rated insulation voltage

250 V AC

Rated surge voltage/insulation

See data sheet, section “Insulation coordination”.

Designation

A1/A2

For signal output M1

Rated control circuit supply voltage U_S

19.2 V DC ... 30 V DC

24 V DC -20 % / +25 %

Rated control supply current I_S

typ. 80 mA

Power consumption at U_S

typ. 1.92 W

Inrush current

max. 1 A

max. 100 mA

max. 125 mA (Δt = 7 ms at U_s)

max. 20 A (≤ 100 ms)

min. 10 mA

typ. 125 mA (Δt = 7 ms at U_s)

Filter time

10 ms (at A1/A2; test pulse rate; switch-on pulses/light test)

4 ms (at A1 in the event of voltage dips at U_s)

5 ms (at A1/A2, test pulse rate, blanking pulses/dark test)

max. 1 ms (at A1/A2, test pulse width, blanking pulses/dark test)

max. 1 ms (at A1/A2, test pulse width, switch-on pulses/light test)

max. 1 ms (Test pulse width of low test pulses)

max. 1 ms (Test pulse width, high test pulse)

min. 10 ms (Test pulse rate, high test pulse)

min. 5 ms (Test pulse rate for low test pulse)

Where test pulse width < 1 ms: test pulse rate = 5 x test pulse width

Protective circuit

Reverse polarity protection

Reverse polarity protection; Universal diode

Serial protection against polarity reversal

Short-circuit protection for M1

Suppressor diode

Surge protection; Suppressor diode

Output description

2 N/O contacts in series, safety-related, floating

Diagnostic contact, 2 NC in series, floating

non-safety-related

Safety-related N/C contacts

safety-related N/O contacts

Number of outputs

1 (digital, PNP)

1 (undelayed)

5 (undelayed)

Contact switching type

1 confirmation current path

5 enabling current paths

Contact material

AgSnO

AgSnO₂

Switching voltage

max. 24 V DC

max. 24 V DC (Enabling current path 23/24)

max. 250 V AC/DC (all other enabling current paths, observe load curve)

max. 250 V AC/DC (Observe the load curve)

min. 5 V AC/DC

Switching power

min. 50 mW

min. 50 mW (5 V / 10 mA)

Switching capacity

3 A (24 V (DC13))

3 A (250 V (AC15))

Limiting continuous current

100 mA

6 A

6 A (observe derating)

Sq. Total current

64 A² (observe derating)

Switching frequency

0.5 Hz (ohmic)

max. 0.1 Hz

max. 0.5 Hz

Mechanical service life

10x 10⁶ cycles

Output fuse

1 A gL/gG (Undelayed contacts)

10 A gL/gG

6 A gL/gG (for low-demand applications)

Voltage

22 V DC (U_s - 2 V)

typ. 23 V DC (U_S - 1 V)

Current

max. 100 mA

Maximum inrush current

500 mA (Δt = 1 ms at U_s)

500 mA (Δt = 100 ms at U_s)

Short-circuit protection

Yes

pluggable

yes

Length

Width

Height

Weight Net

Weight

Package

Volume

m³

No files found

ECLASS-13.0

27371819

ECLASS-15.0

27371819

ETIM 10.0

EC001449

UNSPSC 21.0

39122200

GTIN

4055626145471

ETIM 9.0

EC001449

ECLASS-15.0 ASSET

27250101

1734634 CP-MSTB Coding profile

0⁰⁴€ 0 €

only

available

100+

inquiry

pcs.

1734401 CR-MSTB Coding section

0⁰⁴€ 0 €

only

available

100+

inquiry

pcs.

1212034 CRIMPFOX 6

130¹⁰€ 0 €

only

available

100+

inquiry

pcs.

No related items found

Monday	8:00–17:00
Tuesday	8:00–17:00
Wednesday	8:00–17:00
Thursday	8:00–17:00
Friday	8:00–16:00
Saturday	Closed
Sunday	Closed

PSR-MC82-5NO-1NC-1DO-24DC-SC Extension module

Customer Service Hours