B10d (AC1)
1800000 Cycles (250 V / 1,5 A; 1 NO)
600000 Cycles (250 V / 6 A; 1 NO)
900000 Cycles (250 V / 3 A; 1 NO)
B10d (AC15)
180000 Cycles (250 V / 3 A; 1 NO)
4600000 Cycles (250 V / 0,75 A; 1 NO)
560000 Cycles (250 V / 2 A; 1 NO)
B10d (DC13)
1000000 Cycles (24 V / 1,5 A; 1 NO)
300000 Cycles (24 V / 3 A; 1 NO)
3000000 Cycles (24 V / 0,75 A; 1 NO)
Nominal operating voltage UN
Input voltage range in reference to UN
B10d (AC1)
1800000 Cycles (250 V / 1,5 A; 1 NO)
600000 Cycles (250 V / 6 A; 1 NO)
900000 Cycles (250 V / 3 A; 1 NO)
Typical input current at UN
B10d (AC15)
180000 Cycles (250 V / 3 A; 1 NO)
4600000 Cycles (250 V / 0,75 A; 1 NO)
560000 Cycles (250 V / 2 A; 1 NO)
B10d (DC13)
1000000 Cycles (24 V / 1,5 A; 1 NO)
300000 Cycles (24 V / 3 A; 1 NO)
3000000 Cycles (24 V / 0,75 A; 1 NO)
Insulation
Basic insulation between the changeover contacts
Safe isolation between input and output
Date of last data management
Maximum power dissipation for nominal condition
Test voltage (Winding/contact)
Test voltage (open contact)
Test voltage (Changeover contact/changeover contact)
Rated surge voltage
4 kV (between the changeover contacts)
6 kV (Input/output)
Short-circuit current
1 kA (conditional short-circuit current)
Nominal operating voltage UN
Input voltage range
20.4 V DC ... 28.8 V DC (20 °C)
Input voltage range in reference to UN
Typical input current at UN
Operating voltage display
Contact switching type
2 changeover contacts, forcibly actuated
Maximum switching voltage
Interrupting rating (ohmic load) max.
144 W (24 V DC)
1500 VA (250 V AC)
54 W (60 V DC)
55 W (110 V DC)
55 W (220 V DC)
58 W (48 V DC)
Utilization category CB Scheme (IEC 60947-5-1)
AC15, 3 A/240 V (N/O contact)
Note
the following values are applicable if a gold layer is destroyed
Limiting continuous current
Conductor cross-section rigid
Conductor cross-section flexible
0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block)
0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)