IEC test classification
I + II + III
T1 + T2 + T3
Maximum continuous operating voltage UC
Nominal discharge current In (8/20) µs
Type
DIN rail module, one-piece
Impulse discharge current (10/350) µs, peak value limp
Surge protection fault message
Optical, remote indicator contact
Total discharge current ITotal (10/350) µs
Follow current interrupt rating Ifi
Overvoltage category
II (Auxiliary circuit)
IV (main circuit)
Short-circuit current rating ISCCR
Voltage protection level Up
Connection name
Remote fault indicator contact
Residual voltage Ures
≤ 1.1 kV (at 2.5 kA)
≤ 1.1 kV (at 5 kA)
≤ 1.5 kV (at In)
TOV behavior at UT
457 V AC (120 min / withstand mode)
457 V AC (5 s / withstand mode)
Operating voltage
12 V AC ... 250 V AC
125 V DC (200 mA DC)
Operating current
0.5 A DC (30 V DC)
10 mA AC ... 0.5 A AC
Connection method
Fork-type cable lug
Plug-in/screw connection via COMBICON
Screw connection
Tightening torque
0.5 Nm ... 0.6 Nm
3 Nm (2,5 mm² ... 16 mm²)
4.5 Nm (25 mm² ... 35 mm²)
Conductor cross-section flexible
0.2 mm² ... 2.5 mm²
2.5 mm² ... 25 mm²
Conductor cross-section rigid
0.2 mm² ... 2.5 mm²
2.5 mm² ... 35 mm²
Conductor cross-section AWG
Depth
76.6 mm (incl. DIN rail 7.5 mm)
Flammability rating according to UL 94
Maximum continuous operating voltage UC