Notes on operation
Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed.
The outputs are not suitable for switching different outer conductors.
Date of last data management
Maximum power dissipation for nominal condition
Test voltage (Winding/contact)
2 kVrms (50 Hz, 1 min., winding/contact)
Test voltage (Changeover contact/changeover contact)
2 kVrms (50 Hz, 1 min., changeover contact/changeover contact)
Test voltage (open contact)
1 kVrms (50 Hz, 1 min., open contact)
Input voltage range
82.5 V DC ... 121 V DC (20 °C)
Typical input current at UN
Maximum switching voltage
Minimum switching voltage
Limiting continuous current
Interrupting rating (ohmic load) max.
100 W (110 V DC)
100 W (220 V DC)
120 W (60 V DC)
150 W (48 V DC)
240 W (24 V DC)
2500 VA
Degree of protection (Relay)
Degree of protection (Installation location)
≥ IP54 (Installation location)
Ambient temperature (operation)
Ambient temperature (storage/transport)
Assembly note
in rows with zero spacing