PSR-M-EF1-SDI8-SDO4-DO4-PI Extension module

1104889

PSR-M-EF1-SDI8-SDO4-DO4-PI Extension module

Manufactured by

Brand PHOENIX CONTACT

Safe extension module with 8 safe inputs and 4 safe outputs, 4 reset inputs or 4 signal outputs, 4 clock outputs, TBUS interface, up to SIL 3, Cat. 4/PL e, pluggable Push-in terminal block, TBUS connector included

4055626971735

No suppliers found

Product recommended retail price (RRP) is

0⁰⁰€

474⁵⁰€ 0 € pcs.

All prices without tax

All prices with tax

inquiry

only

available

100+

inquiry

pcs.

Properties

Description

Dimensions

Files

Codes

Note on application

Only for industrial use

Rated control circuit supply voltage US

19.2 V DC ... 28.8 V DC

Product type

Safety device

Rated control supply current IS

typ. 45 mA (Outputs inactive)

typ. 68 mA (Outputs active, without load)

Application

Emergency stop

Light grid

Safe shutdown

Safety door

Power consumption at US

typ. 1.08 W (Outputs inactive)

Control

1 and 2 channel

Protection class

III

Overvoltage category

Degree of pollution

Response time

see user manual

Restart time

max. 10 s (Boot time)

min. 5 s (Boot time)

Maximum power dissipation for nominal condition

7.48 W (with max. permissible load)

Nominal operating mode

100% operating factor

Interfaces

DIN rail TBUS for connection to the master module, supplied as standard

Rated surge voltage/insulation

See data sheet, section “Insulation coordination”.

Designation

A1/A2

Rated control circuit supply voltage U_S

19.2 V DC ... 28.8 V DC

Rated control supply current I_S

typ. 45 mA (Outputs inactive)

typ. 68 mA (Outputs active, without load)

Power consumption at U_S

typ. 1.08 W (Outputs inactive)

Inrush current

max. 2.3 A (Δt = 1 ms at U_s)

max. 600 mA (Δt < 10 ms)

Filter time

250 ms ±2 ms (Test pulse rate > 500 ms)

max. 250 ms ±2 ms (adjustable)

min. 3 ms ±2 ms (adjustable)

Test pulse rate ≥ 2x set filter time, min. Test pulse rate = 10 ms

typ. 5 ms (at A1 in the event of voltage dips at U_s)

Protective circuit

Serial protection against polarity reversal

Surge voltage detection; yes, at 33 V DC

Protection

typ. 4 A (A1)

Description of the input

configurable (as signal output or reset input)

IEC 61131-2 Type 2

Safety-related digital inputs

Number of inputs

8 (4 x 2-channel, 8 x 1-channel)

Input voltage range "0" signal

0 V DC ... 5 V DC

Input voltage range "1" signal

11 V DC ... 28.8 V DC

Input current range "0" signal

< 1 mA

Cable length

max. 100 m (per input)

max. 100 m (per output)

Max. permissible overall conductor resistance

1.2 kΩ (Input and reset circuit at U_S)

max. 1.2 kΩ (Input and reset circuit at U_S)

Current consumption

max. 12.5 mA (at a control voltage of 28.8 V DC)

max. 14.7 mA (at a control voltage of 28.8 V DC)

typ. 10 mA (typ. with U_S)

typ. 12 mA (typ. with U_S)

Output description

IEC 61131-2 type 0.5 (observe limiting continuous current)

non-safety-related, configurable (as signal output or reset input)

PNP, IEC 61131-2 Typ 0,1

PNP, OSSD, digital

Safety-related digital outputs

Number of outputs

4 (2 x 2-channel, 4 x 1-channel)

4 (digital, PNP)

Short-circuit protection

Yes (max. permissible short-circuit current 12 A)

Yes (self-limitation at 1.1 A)

Leakage current

max. 100 µA

max. 250 µA (in the Low state)

max. 4.5 mA (in the Low state)

Ohmic load

min. 180 Ω (Observe limiting continuous current)

min. 50 Ω (Observe limiting continuous current)

Max. capacitive load

max. 470 nF

max. 820 nF

Max. inductive load

max. 2.4 mH

See "Protective circuit"

Limiting continuous current

1.6 A (Total current of all safe digital outputs)

100 mA (per channel)

400 mA (per channel)

400 mA (Total current of all digital signal outputs)

400 mA (Total current of all outputs)

Nominal output voltage

24 V DC (Supply via A1)

Nominal output voltage range

18.6 V DC ... 28.2 V DC (U_S - 0.7 V)

Switching frequency

max. 1/(4 x t_Cycle) [Hz]

Output voltage when switched off

< 0.1 V

max. 0.1 V

Test pulses

< 120 µs (Test pulse width of low test pulses)

< 150 µs (Test pulse width, high test pulse)

≤ 200 µs (Test pulse duration)

≥ 1.5 s (Test pulse rate, high test pulse)

≥ 650 ms (Test pulse rate for low test pulse)

Test pulse rate = 8 x t_Cycle [ms]

Discharging circuit

Yes, internal

Output voltage range

18.2 V DC ... 27.8 V DC (U_S - 1 V)

Voltage

24 V DC (via A1)

Maximum inrush current

1.1 A (Δt = 3 s at U_s)

pluggable

yes

Length

Width

Height

Weight Net

Weight

Package

Volume

m³

No files found

ECLASS-13.0

27371819

ECLASS-15.0

27371819

ETIM 10.0

EC001449

UNSPSC 21.0

39122200

GTIN

4055626971735

ECLASS-15.0 ASSET

27250101

1734634 CP-MSTB Coding profile

0⁰⁴€ 0 €

only

available

100+

inquiry

pcs.

1734401 CR-MSTB Coding section

0⁰⁴€ 0 €

only

available

100+

inquiry

pcs.

1212034 CRIMPFOX 6

130¹⁰€ 0 €

only

available

100+

inquiry

pcs.

No related items found

Monday	8:00–17:00
Tuesday	8:00–17:00
Wednesday	8:00–17:00
Thursday	8:00–17:00
Friday	8:00–16:00
Saturday	Closed
Sunday	Closed

PSR-M-EF1-SDI8-SDO4-DO4-PI Extension module

Customer Service Hours